Important

Hydrogen power

We are working on a project to run Bullet on little petrol/diesel and more "water"; yes water; what we drink. The project is done by Me, Shekar(Bullet mechanic) and Nabeel (Student of BTec Electronics in Government Engineering College, Thallaseri which is under CUSAT UNIVERSITY).
The device we are making can create Oxyhydrogen out of water which is combustible and safer than lpg or other gases.

Project completion
*Making the device - Completed
*Gas production - Successful
*Testing on Bullet - Tested (More tuning have to be done)
*Mileage gain test - 10 km extra (Have to do more tuning and adjustments)
*Road test - Tested (Smooth running and no color for the exhaust)
*Power supply - Now directly from alternator. Changing AC to DC with a custom made rectifier.
*Power supply - Additional switch added to draw an extra power from the battery to increase production.
*Valves are attached to control the gas flow.

23 comments:

  1. Sarun George12 September 2009 at 03:10

    All the best........

    ReplyDelete
  2. iYogi7 October 2009 at 10:16

    Keep this going, would love to check on the status...nice work..

    Lets make world a cleaner place..

    ReplyDelete
  3. Unni25 October 2009 at 09:56

    Thank you Sarun and iYogi

    ReplyDelete
  4. Baby.j.25 December 2009 at 00:45

    BRO MAY LORD'S BLESSINGS BE WITH YOU.ALL THE BEST.

    ReplyDelete
  5. Samir25 December 2009 at 10:05

    Sure this is fantastic. You will join hands in saving our country and also our planet.
    Have you introduced this in local market ?
    Do let me know if you need any funds to go ahead with this plant ?

    ReplyDelete
  6. AZHAR KHAN25 December 2009 at 10:20

    dude ur concept is good but no offence is it safe for engine life and thumps and of coz yes is it safe of human respiratory ??? how about some leaks in bubller or device after all its distill water it burns ur cloths and affects ur skin

    ReplyDelete
  7. Unni26 December 2009 at 06:45

    @Samir
    Thank you so much brother...
    We are planning direct marketing.
    The project is around 90% complete. It will take few months.
    Thank you so much for your willingness for the fund. We need your inspiration and prayers.
    Thanks again

    ReplyDelete
  8. abhishek28 December 2009 at 02:52

    hey bro..
    bloody fantastic concept... i am a mechanical engg. and i can imagine the amount of work and research gone into this project..but still, if u could give a bit more clearer idea as to how did u achieve the required temp. , the rpm , the ideal exhaust inlet timing etc, i wud be glad..

    great going bro...wish u all the best and luck...

    ReplyDelete
  9. Unni4 January 2010 at 06:58

    We need petrol/diesel to run the Bullet. Gas is mixed with petrol in carburetor. We actually tune the engine to consume more gas than fuel. So we save fuel and cleans the carburetor.

    ReplyDelete
  10. NaSh..4 March 2010 at 22:16

    hii..
    bro i saw ur video.......wow!!!!!superrr!!!!!!......bro u hv a bright future ahead...ALL DHE BEST.. :)

    ReplyDelete
  11. Unni7 March 2010 at 17:23

    @NaSh..
    Thank you brother....
    Please pray for the success of the project.

    ReplyDelete
  12. RAMAMOORTHY7 March 2010 at 20:11

    great..good work..keep it up..

    ReplyDelete
  13. rahul26 March 2010 at 06:00

    hi,
    first congratulations ! u have done gr8 job.
    answer to question by Jorge is that, any bike engine generat much electrical power than required, excess electricity go wast after changing battery, even if battery is charging and head lamp is on there is much electrical power to carry out electrolysis of water. well i would like to test one of the unit, if it is possible. just inform me
    onece again amezing application of 110 yr old method of splitting water.

    ReplyDelete
  14. Sachin3 August 2010 at 07:15

    Hey ! Dats a neat project. My best wishes to you for the future Unni. TC.

    Sachidanand Shetty.

    ReplyDelete
  15. Page10 August 2010 at 10:15

    Dear Arun,

    At what stage is your Hydrogen Booster ? How much would that cost if i want one to be installed on my 350cc Bullet ?

    Thx.

    ReplyDelete
  16. Unni12 August 2010 at 01:12

    @Page
    I cannot tell you anything about the cost because we are still doing research.

    ReplyDelete
  17. Page13 August 2010 at 16:20

    Where can we meet you, and the bullet that has the hydrogen "booster" ?

    Page

    ReplyDelete
  18. Anonymous16 October 2010 at 00:37

    hi Bro. How r u ? i m waitting for ur project . is it finished ?

    ReplyDelete
  19. Unni16 October 2010 at 07:43

    The project have become more complex. We are trying hard to make the device small and productive. It will take time. I request all of your prayers.
    Thank you all.

    ReplyDelete
  20. Anonymous5 November 2010 at 07:49

    Happy Diwali Bro ! i wish you got sucess in your project soon.

    ReplyDelete
  21. Unni9 November 2010 at 10:19

    Thank you all....
    Happy Diwali

    ReplyDelete
  22. Vatsa24 November 2010 at 03:57

    Good work unni!!!
    please let us know when you'd release this to the market...
    Kindly keep me posted on vatson81@gmail.com...

    All the best :)

    ReplyDelete
  23. Aditya narula19 February 2011 at 20:40

    hi, Frnd , hows ur project ?

    ReplyDelete

Subscribe to: Post Comments (Atom)